기계적 성능을 유지하는 전기 전도성 열가소성 수지를 위한 대전방지 첨가제


TUBALL™ 그래핀 나노튜브(또는 단일벽 탄소 나노튜브)는 플라스틱을 위한 전도성 첨가제로서 놀라운 결과를나타냅니다.

그래핀 나노튜브는 열가소성 화합물 내부에 밀도 있는 전도성 네트워크를 형성해 플라스틱의 기계적 및 유체거동 특성에 악영향을 주지 않으면서도 안정적인 대전방지 물성을 보장합니다.

현재 옥시알은 다음과 같이 열가소성 수지(thermoplastics)을 위한 나노튜브 기반의 농축액을 판매하고 있습니다: glass fiber filled polyamide, polyamide, glass fiber filled PPS, PVC-plastisol, TPU, polycarbonate, ABS, PC-ABS polypropylene이 외, 폴리에틸렌, 폴리스티렌을 위한 나노튜브은 검증 단계에 있습니다.

전도성 첨가제: 기존 첨가제 VS TUBALL™ 제품 

Note: This diagram provides average trends compared with other additives based on OCSiAl data. Product performance may vary depending on product type and formulation.

TUBALL™ MATRIX특장점

  • Enables a new combination of properties in comparison to standard conductive additives 
  • Surface resistivity of 103–109 Ω/sq*
  • Volume resistivity of 103–109 Ω∙cm*
  • Maintains a good balance of mechanical properties
  • Stable performance reducing the number of out-of-spec parts
  • Good processability
  • Permanent homogeneous resistivity without “hot spots”
  • High surface quality
  • Allows production of conductive parts that retain colors
  • Freedom to incorporate other functional ingredients 

*Values may vary depending on the formulation, processing, and products. The values shown are given as the typical reference.

플라스틱용 TUBALL™ 그래핀 나노튜브 제품

To adapt nanotubes to a standard manufacturing process without purchasing specific equipment or changing the original formulation, OCSiAl has developed the TUBALL™ MATRIX line of concentrates.


TUBALL™ 그래핀 나노튜브 솔루션

ProductCarrierForm*Target systems
PolyethylenePE rotomoldingPolypropylenePVCThermoformed HIPSTPUGF filled PPSABSPCGF filled PAPC-ABSPAGF filled PBTPowder coatingsPET
TUBALL™ MATRIX concentrates (Pellets or black flakes paste @ standard dosage 0.3%–3.0%)
Polyol esterPLT
Epoxidized fatty acid glyceride + stabilizing agent (CAS-No. 162627-31-8, CAS-No. 64742-55-8)PST**
Polyethylene waxPLT
Reaction mass of fatty acids, montan-wax, ethylene estersPLT
TUBALL™ suspensions COAT_E (Black liquid @ standard dosage 1.5%–6.4%)
Water + anionic surfactant (sodium dodecylbenzenesulfonate, CAS-No. 25155-30-0)SPSN
* PLT – pellets, PST – paste, SPSN – suspension
** PVC-plastisol specific


Related videos

Anti-static properties in rotomolding: Easy cost-effective solution for the whole conductivity range

Electrical conductivity for PVC plastisol


Contact us to discuss your project specifications or to request a TUBALL™ MATRIX sample