TUBALL™ graphene nanotubes are applied via easy-to-use TUBALL™ MATRIX, which is a line of additives based on polymer-carriers and pre-dispersed TUBALL™ graphene nanotubes, or TUBALL™ COAT_E suspensions.

Choose the TUBALL™-based product based on your requirements:

Concentrate carrier	Water + anionic surfactant	Alkylolammonium salt	Polyethylene wax
Form	Suspension	Paste	Pellets
Conductive properties	Anti-static / conductive 105–109 Ω/sq	Anti-static 107–108 Ω/sq	Anti-static 106–107 Ω/sq
Working  dosages*	0.25–2.50 wt.%	0.5 wt.%	0.7–1.0 wt.%

*Values may vary depending on the formulation, processing, and products, and are given as a typical reference. 

Key benefits of TUBALL™ for rotomolded parts

• Low dosage starting from 0.01 wt.% TUBALL™ nanotubes to obtain conductive performance*
• Permanent, stable, and uniform electrical resistivity without “hot spots”
• Maintains a good balance of mechanical properties
• Possibility of color solutions*
• Stable performance reducing the number of out-of-spec parts

*Depending on the formulation, processing, and products. 

Full range of resistivity: anti-static and conductive

Graphene nanotubes’ unique morphology allows them to create a dense conductive network inside thermoplastic compounds at ultra-low loading rates.

OCSiAl internal LLDPE formulation. IEC 61340-2-3. 

Maintained mechanical properties

OCSiAl internal results.

Easy to apply at required approach

TUBALL™-based products can be processed with standard equipment that is widely used in the thermoplastics industry.